Question 1

How often do I need my fire extinguisher inspected?

Accepted Answer

Your fire extinguisher’s pressure gauge should be checked monthly to ensure it is holding pressure. These monthly checks can be performed by you or a designated employee and should be documented. In addition, fire extinguishers must be inspected and certified annually by a fire protection equipment company. A complete internal breakdown inspection is required every 6 years. Both the annual and 6-year inspections must be performed by a certified fire protection equipment company such as Fire Solutions NW.

Question 2

How do I use a fire extinguisher?

Accepted Answer

To use a fire extinguisher, remember the PASS method. Pull the pin at the top of the extinguisher to release the locking mechanism. Aim at the base of the fire, not the flames, to extinguish the fuel source. Squeeze the lever slowly to discharge the extinguishing agent. Sweep from side to side until the fire is completely out. Always operate the extinguisher from a safe distance and follow the instructions on the extinguisher label.

Question 3

How does a fire sprinkler system work?

Accepted Answer

Fire sprinkler systems activate when heat from a fire raises the temperature near a sprinkler head, usually between 135 and 165 degrees Fahrenheit. Each sprinkler head contains a heat-sensitive glass bulb filled with a glycerin-based liquid that expands and breaks when the required temperature is reached. Once activated, the sprinkler releases pressurized water through a network of pipes, spraying water downward to extinguish the fire and prevent it from spreading. Only the sprinkler closest to the fire is activated, not the entire system.

Question 4

How often do I need to get my sprinkler system inspected?

Accepted Answer

Fire sprinkler systems should be inspected annually by a certified and properly licensed inspection company such as Fire Solutions NW. Local authorities or insurance providers may require more frequent inspections depending on regulations and coverage requirements.

Tag: emergency light maintenance

Emergency Light Power Supply in Washington Inspection, Testing, Safety & Repairs

6 MONTHS FREE MONITORING WHEN YOU SIGN UP FOR 3 YEARS

Josh@firesolutionsnw.com